plc-s1200

SIMATIC  kit S7-1200

The PLC-S1200 kit is a didactic solution based on the SIMATIC S7-1200 programmable logic controller, facilitates and accelerates the implementation of simple automation tasks and allows a flexible and efficient implementation of different tasks, from engineering to TIA Portal Software or integration of HMI panels, to solutions for intrinsically safe applications

The didactic panel has on the bass a programmable logic controller S7-1200, where all inputs / outputs (analog or digital) are connected to the outside by 4mm banana plug terminal blocks with switches and indicator lights. 
The S7-1200 Professional Kit also includes expansion modules, Ethernet connection, HMI interface (CPU1214C 6ES7214-1AG40-0XB0, Power supply 6EP1332-1SH71, 8AI SM1231 6ES7231-4HF32-0XB0, 4AO SM1232 6ES7232-4HD32-0XB0, Switch 6GK5005-0BA00-1AB2, HMI TP1200 6AV2124-0MC01-0AX0);
The S7-1200 Kit can be manufactured according to the dung of the laboratories of Algerian universities that use the product. 
The kit can be used with the PLC-SIM industrial process simulator that allows to test the PROGRAMS OF THE CONTROLLER on 2D / 3D virtual processes (road traffic, elevator, conveyor, tanks ...).

plc-s300

SIMATIC  kit S7-300

The PLC-S300 kit is a didactic solution based on the SIMATIC S7-300 programmable logic controller (CPU313, CPU314), facilitates and accelerates the implementation of simple automation tasks and allows a flexible and efficient implementation of different tasks, from engineering to TIA Portal Software or integration of HMI panels, to solutions for intrinsically safe applications
The didactic panel has on the bass a programmable logic controller S7-300, where all inputs / outputs (analog or digital) are connected to the outside by 4mm banana plug terminal blocks with switches and indicator lights. 
The S7-300 Kit can be manufactured according to the dung of the laboratories of Algerian universities that use the product. This kit can be used with the PLC-SIM industrial process simulator that allows to test the programs of the PLC on 2D / 3D virtual processes (road traffic, elevator, conveyor, tanks ...).

plc-dcm

Didactic kit DC current machine 

The PLC-DCM kit is a didactic solution based on a small DC motor facilitate the testing the implementation of simple automation tasks. 

plc-spm

Unipolar stepper motor didactic kit 

The PLC-SPM kit is a didactic solution based on a small unipolar stepper motor facilitate the testing implementation of simple automation tasks. 
 

. 

plc-vfd

Variable speed drive with PROFIBUS 

The PLC-VFD kit is a didactic solution based on Siemens Sinamics G120 variable speed drive, making it easy to know the principles of speed variation of synchronous alternating current motors.
Master the procedures for commissioning, adjustments and settings.
Be able to interpret the signaling of defects and alarms, to commission the network.
PROFIBUS DP between the drive and the PLC
 

. 

plc-hmi

Didactic HMI system 

The PLC-HMI training system is a touchscreen designed for learning and didactic design, enabling control and observation of machines and installations. Programming is done through the WinCC visualization software.

. 

plc-3fe

3 Floor elevator 

The 3-level didactic elevator module is a comprehensive educational system that simulates a realistic elevator with 21 on/off inputs/outputs. It allows users to experience programming and control of Programmable Logic Controllers (PLCs) in various scenarios, introducing them to the fundamental principles of industrial automation, industrial computing, sequential process control, and electronics. Its compatibility with a wide range of PLCs, configurable flexibility, and numerous educational applications make it a valuable tool for educational institutions and vocational training centers.

. 

plc-5fe

5 Floor elevator 

A 5-floor elevator, designed for educational purposes, offers versatile connectivity with a set of 50 inputs/outputs via 4mm sockets, allowing for advanced expansion. This configuration facilitates hands-on exploration of automation, control, and system management concepts in an educational context. With a total of 28 outputs (sensors) and 14 inputs (actuators), it is used in various applications such as driving automated systems with GRAFCET via a PLC or a PC with software, as well as in computing for controlling a sequential process in assembly language or a high-level language, and in electronics and automation.

plc-SAS

Stamping ARM System 

The PLC-SAS offers a modular and educational parts buffering cell, equipped with 32 sensors and 15 actuators for precise operation management. A versatile 5-axis robot handles parts with precision, a buffing station ensures optimal marking control, an arrival magazine supplies the system, an evacuation ramp removes the parts, and an intelligent management system oversees the entire process for optimal safety and efficiency. Designed for teaching the principles of industrial automation control via PC, it allows students to grasp the fundamental concepts of automation and robotics, practice programming and controlling an automated system, understand the interactions between different elements of a production cell, and develop valuable technical and analytical skills for the industry.

plc-CTL

Car Traffic Light

The PLC-CTL is a simulation model representing an intersection between a main road and a secondary road. It helps organize the traffic of cars and pedestrians through an automated system. This system includes a push button representing the pedestrian call to cross the road and a proximity sensor that manages the traffic lights through a signal and 28 LEDs, each connected to a traffic light.

plc-pv5-m

5/2 Monostable Pneumatic Control Valve

Valve distributor with pneumatic pilot control. The control signal (by impulse or by holding) allows changing states. The pneumatic control distributors are equipped with manual auxiliary control

plc-pRV

Monostable Roller Lever Valve

The roller lever valve is also a pneumatic device used to control the flow of air in pneumatic systems. It consists of a lever mounted on a roller that pivots around an axis. When the lever is actuated, the roller moves along a surface, which opens or closes the air passage

plc-pR

Air compression regulator 

The roller lever valve is also a pneumatic device used to control the flow of air in pneumatic systems. It consists of a lever mounted on a roller that pivots around an axis. When the lever is actuated, the roller moves along a surface, which opens or closes the air passage.

plc-pS

Pneumatic Switch 

The pneumatic switch is a switching device used in pneumatic systems. It is designed to control airflow by opening or closing a passage in response to predefined conditions.

plc-psS

Pneumatic Switch 

The pneumatic switch is a switching device used in pneumatic systems. It contains two positions to switch the flow output. It is designed to control the airflow by opening or closing a passage in response to predefined conditions.

plc-PLG-NON

Logic Gate NO

The NO logic gate module is a pneumatic device that acts similarly to its electronic counterpart, but it uses compressed air instead of electrical signals. It produces an air outlet that is the opposite of its inlet. In other words, when the air inlet is on, the outlet is off, and vice versa.

 plc-PLG-AND

Logic Gate AND

The AND gate module is a pneumatic device that operates similarly to its electronic counterpart, but it uses compressed air instead of electrical signals. It produces a high output only when both of its inputs are at a high level. In other words, if one of the inputs is at a low level, the output will also be at a low level.

 plc-PLG-OR

Logic Gate OR

The OR gate module is a pneumatic device that operates similarly to its electronic counterpart, but it uses compressed air instead of electrical signals. It produces a high output if at least one of its inputs is at a high level. The output will be low only if all inputs are at a low level.

 plc-PLG-M

 Memory logic gate

The memory logic gate module is a pneumatic device that operates similarly to its electronic counterpart. It retains a binary state, represented by a single piece of data (0 or 1). Unlike other logic gate modules that generate an output based on current inputs, by connecting the control and one of the inputs to a pressure source, the module will direct the pressure flow to the output connected to the input under connection, even after disconnecting the pressure input (input X is connected to output A, and input Y is connected to output B). It will maintain and reproduce this state until the pressure input is changed.

 plc-PDT

Pneumatic Timer

The pneumatic timer module is a pneumatic device that operates similarly to its electronic counterpart, introducing a time delay in the transmission of the output pressure relative to the input pressures. Unlike other logic gates that produce an output immediately based on the current inputs, this logic gate delays the output production for a certain period after the input conditions are met.

 plc-PDAC

Double Acting Pneumatic Module 

The Double-Acting Cylinder Module (Electrical & Pneumatic End-of-Stroke) is a set of equipment used in cylinder systems to control the movement and position of the cylinders. This module includes pneumatic actuators and end-of-stroke detection devices (pneumatic and electrical). The electrical end-of-stroke devices detect the position of the cylinder using electrical sensors, while the pneumatic end-of-stroke devices detect the position using pneumatic sensors. This module allows for precise control of cylinder movements and ensures their safety by preventing excessive or unwanted movements.

 plc-EIL

LED Indicator 

An LED indicator is an electronic module that uses light-emitting diodes (LEDs) to display visual information. These indicators come in two colors, green and red, and are used to signal states, conditions, or alerts in various devices or systems. The LEDs can blink or stay continuously lit to convey specific information to the user.

 plc-EPB

Electrical push button

Electrical push button is an electronic module that uses normally closed (NC) electrical push buttons to perform specific tasks. These buttons come in two colors, green and black, and are used to execute states, conditions, or alerts in various devices or systems.

 plc-EPB2

Electrical push button 2

 Electric Push Button 2 is an electronic module that uses normally closed (NC) electric push buttons and a three-position switch to perform specific tasks. Two buttons come in 2 black colors, and the switch has three positions to choose one of the voltage outputs. They are used to execute states, conditions or alerts in various devices or systems.

 plc-Ess

Electrica selector

 Electric selector is an electronic module that uses electric rotary switches to perform well-defined tasks. It contains 2 two-position rotary switches and an emergency button. They are used to run states, conditions and alerts in various devices or system.

 plc-Ess

Electrica selector

 Electric selector is an electronic module that uses electric rotary switches to perform well-defined tasks. It contains 2 two-position rotary switches and an emergency button. They are used to run states, conditions and alerts in various devices or system.

 plc-ELG

Electrical logic gate

The electrical logic gate module is a device that contains four compartments, each with a specific logic circuit. The first two compartments contain the AND logic circuit (which takes two logical signals as input and produces a high logical output only when all input signals are high; otherwise, the logical output will be low). The last two compartments contain the OR logic circuit (which takes two logical signals as input and produces a high logical output if at least one of the input signals is high; otherwise, if all input signals are low, the output will be low).

 plc-E4CR

4 Contact relay

A 4-contact relay is an electronic module that uses a relay to control an electrical circuit by opening or closing electrical contacts in response to an electrical signal from another circuit. It contains a relay, a push button connected to an indicator LED for testing the relay, and 4 switching outputs. There are two ways to activate this relay: manually using a push button or electrically. By activating this relay, the electrical circuit will open the closed contact and close the open contact.

 plc-Epv3-m

3/2 monostable electrically operated valve

Spool valve with electro-pneumatic pilot control. The electrical control signal allows changing the pressure flow path. Electro-pneumatic control valves are equipped with manual auxiliary control.

 plc-Epv5-m

5/2 monostable electrically operated valve

Spool valve with electro-pneumatic pilot control. The electrical control signal allows changing the pressure flow path. Electro-pneumatic control valves are equipped with manual auxiliary control.

 plc-Epv5-b

5/2 monostable electrically operated valve

Normally closed (NC) spool valve with bistable electro-pneumatic pilot control and two electrical connectors. The electrical control signal allows changing the pressure flow path. Electro-pneumatic control valves are equipped with manual auxiliary control.

 plc-pel

Pneumo-electric logic gate 

The pneumo-electric logic gate module is a device that combines pneumatic and electrical principles to perform logical operations. This device includes a pneumatic direction control as well as a normally closed (NC) connection at output 3 and a normally open (NO) connection at output 2. When the control is pressurized, the connection responds by closing circuit 2 and opening circuit 3.