reg-ps

Power Supply Unit 

This module can be used to power any didactic system or to search that needs a balanced power supply of 15V.  

reg-ref

Reference policy generator 

This module is a reference voltage generator for analog or digital servo systems either in open or closed loop.  

reg-apid1

Analog PID Regulator

Compact industrial regulator with fast analog control. Can be used as a P, PI, PD or PID regulator for continuous regulation. With input subtractor node for two set quantities and one set quantity, measuring point for the adjustment deviation

reg-apid2

Analog PID Regulator 

Compact industrial regulator with fast analog control. Can be used as a P, PI, PD or PID regulator for continuous regulation. With input subtractor node for two set quantities and one set quantity, measuring point for the adjustment deviation.

reg-dcm

Real time digital control module 

Module of the digital regulation of automatic and electrical systems.
The REG-DCM is the intelligent interface for all fields of electrical engineering (Automation, electrical networks, electrical machines, measurements...) and applied physics. 
The REG-DCM can be used for digital control or PC control of electrotechnical systems in real time.  
Complicated control and optimization algorithms can be easily tested using Matlab/Simulink or LabVIEW.

reg-dpid

Digital PID Regulator 

Compact industrial regulator with fast digital control. Can be used as a P, PI, PD or PID regulator for continuous regulation. With input subtractors node for two set quantities and one set quantity, measuring point for the adjustment deviation.

reg-hys

Hysteresis Regulator 

Compact regulator with quick control. Can be used in discontinuous closed-loop regulations, so is an all-or-nothing regulator allow to regulate slow processes that do not require high adjustment accuracy. The hysteresis band of the regulator is adjusted using the potentiometer. An LED indicates the output state of the hysteresis. 

reg-daq

Data acquisition for real time digital control 

Data acquisition module for the digital control and regulation of automatic and electrical systems.
The REG-DAQ is the intelligent interface for all areas of electrical engineering (Automation, electrical networks, electrical machines, measurements, etc.) and applied physics.
The REG-DAQ can be used for digital regulation or control of electrotechnical systems by PC in real time.
Complicated control and optimization algorithms can be easily tested using Matlab/Simulink or LabVIEW.

reg-spd1

Speed control module with load 

This module is specially adapted to

practical work regulation of the speed of the DC motor. It is composed of:

- A 10w magnet DC motor

- A generating load of the same type,

- Tacheometer allows the measurement of the speed of the group

- An MLI generator and a pure power amplifier power the motor.

- Electronic charging torque regulator linen  

- Motor/generator unit speed display system.

reg-spd2

Speed control module without load 

This module is specially adapted to

practical work regulation of the speed of the DC motor. It is composed of:

- A 10w magnet DC motor

- A generating load of the same type,

- Tacheometer allows the measurement of the speed of the group

- An MLI generator and a pure power amplifier power the motor.

- Electronic charging torque regulator linen  

- Motor/generator unit speed display system.

reg-pos1

Position  control module with load 

This module is specially adapted to
practical work DC motor position regulation. It is composed :
- A direct current magnet motor
- A generating load of the same type,
- A speed reducer
- A potentiometer system for position measurement.
- A PWM generator and a power amplifier to power the motor.
- A linear electronic load torque regulator
- A system for displaying the position of the motor/generator unit.

.

reg-pos2

Position  control module without  load 

This module is specially adapted to

practical work regulation of the position of the DC motor. It is composed of:

- A magnet DC motor

- A generating load of the same type,

- A Speed Reducer

- A potentiometer system for position measurement.

- An MLI generator and a pure power amplifier power the motor.

- An electronic charging torque regulator  

- A system for displaying the position of the power unit/generator.

.

reg-tmp

Temperature Control Module 

This module is specially adapted to

practical work temperature regulation.  It is composed of:

• Tunnel
• Heating element
• Fan
• Temperature sensor.
• A system for displaying the position of the power unit/generator.

.

reg-lvl

Liquid Level Control Module 

This module is specially adapted to

practical work regulating the level and flow of liquid in a hydraulic installation. It is composed of:

- A pump with DC motor has like

- A liquid level sensor

- A liquid flow sensor

- A manual valve

reg-dcm

Motor generator Module 

The REG-DCM device is a didactic servo kit accessory and consists of an additional motor/generator/sensors mounts a power box and complete interface. 
This DC machine is a permanent magnet type and does not require external excitation. Adding to the servo kit allows the study of the speed control systems and position of a firm loop motor and also the characteristics of a loaded standard motor.
A quadrature optical sensor mounted on the rotation shaft makes it possible to measure the position and speed of rotation of the motor/generator assembly. This sensor has a fast analog conversion system for speed and position signals (for analog control applications).
The torque of the load is also controllable either by a potentiometer or by an external control system.
The REG-DCM has a four-quadrant DC/DC power converter (H-bridge) with its complete system of isolation, protection, sensor and pulse drop modulator. This system makes it possible to control the motor in two directions of rotation, and both modes of operation motor or generator of a digital (MLI) or analog handling. 

reg-ll

Motor lead/lag correction module 

This module allows the realization of a wide range of correctors for continuous servo on various systems: motor, heating system, magnetic levitation. This model allows students to easily perform different servos by interconnecting the blocks with each other and adjusting the parameter values so as to obtain the transfer functions calculated in preparation.