daq-us

USB Data acquisition 

Our DAQ-US device is engineered to fit a wide array of applications in the field of data acquisition And process control. Acquiring data without programming with our included software, or use one of the many supported applications or programming languages (Matlab/Simulink, LabVIEW).
With plug-and-play USB interface easily connects one or multiple DAQ-US devices.

daq-es

 Ethernet Data Acquisition 

The DAQ-ES Ethernet-based data acquisition solution is ideal for portable or distributed applications. This solution provides accurate data acquisition over IP networks. Our data acquisition devices allow you to measure and monitor discrete/analog signals from a remote location.

daq-ws

WIFI Data acquisition 

Our DAQ-WS device is a wir eless product which provide the freedom to move your DAQ device to where it’s needed.
The DAQ-WS is compatible with Windows or Android operating systems, allowing users to use tablet and smartphone DAQ solutions.

daq-ds

dSPACE DS1104 Data acquisition 

As it is known, the DS1104 has only 8 analog inputs. And some applications such on DFIG control, the user need more then 8 inputs (Grid voltages and currents, stator currents, rectifier input voltages and currents, Converter DC bus voltage , inverter output currents...) . The DAQDS provide six additional 12bit ADC for each board, and up to 8 boards can be connected to one DS1104 board (48 CH max).

daq-ep

Ethernet Three-phase power data acquisition 

The DAQ-EP is a Triple Hall effect current and triple insulted voltage sensors board capable of measuring three AC/DC High level voltage and current. The DAQ-EP Ethernet-based data acquisition solution is ideal for portable or distributed applications. this solution provide accurate data acquisition over IP networks.

daq-wp

WIFI Three-phase power data acquisition 

The DAQ-WP is a Triple Hall effect current and triple insulted voltage sensors board capable of measuring three AC/DC High level voltage and current. Our DAQ-WP device is a wireless product which provide the freedom to move your DAQ device to where it’s needed. The DAQ-WP is compatible with Windows or Android operating systems, allowing users to use tablet and smartphone DAQ solutions.

daq-up

USB  Three-phase power data acquisition 

The DAQ-UP is a Triple Hall effect current and triple insulted voltage sensor board capable of measuring three AC/DC High level voltage and current. With plug-and-play USB interface easily connects one or multiple DAQ-UP devices.

daq-dp

dSPACE DS1104  Three-phase power data acquisition 

The DAQ-DP is a Triple Hall effect current and triple insulted voltage sensor board capable of measuring three AC/DC High level voltage and current.
The DAQ-DP provides three voltage and three current input in each board. Up to 8 boards can be connected to one DS1104 board without using the original ADCs ( 24 voltage input and 24 Current inputs).

daq-upv 

USB PV characteristics  data acquisition 

The photovoltaic array characteristic shows the dependency of cell current and voltage to irradiance and temperature.
DAQ-UPV is a Solar Cell I-V Curve USB Data Acquisition System characterizes the currentvoltage (I-V) characteristics of photovoltaic devices with currents up to 10.0 amperes.

daq-wpv 

WIFI PV characteristics  data acquisition 

As DAQ-UPV, the DAQ-WPV is a Solar Cell IV Curve wireless Data Acquisition System characterizes the current-voltage (I-V) characteristics of photovoltaic devices .

daq-wsi  

Solar Irradiance Measurement 

The DAQ-WSI is solar-powered and wireless solar measuring device allows the user to record direct sunlight over an extended period of time. Solar irradiation values, solar light values and temperature values are sent to the computer , tablet or smartphone by WIFI connection. Note: DAQ-WSI can be equipped by GPRS system for very long distance measurement..

daq-wws  

Wind speed  Measurement 

The DAQ-WWS is solar -powered and wireless anemometer. it is possible to transfer the measuring results from the wind speed meter to a computer, tablet and smartphone in order to guarantee easy data storage and further analysis.
Note: DAQ-WWS can be equipped by GPRS system for very long distance measurement.

daq-wppv

WIFI Photovoltaic power data acquisition 

The DAQ-WPPV is electrical parameters measurement of solar powered systems. With three isolation high level voltage sensor and three hall effect current sensor, DAQWPPV allows the user to record a PV, battery and load (or electrical grid) electrical parameters (Currents and Voltages) over an extended period of time. This parameters values are sent to the computer, tablet or smartphone by WIFI connection.
Note: DAQ-WPPV can be used with DAQ-WSI, and can be
equipped by GPRS system for very long distance
measurement .